tincnalaucon1972.netlify.com

Automatic Inline Bottle Capping Machine Model TruCap-X-Vert

ACASI Inline Bottle Capper with Vertical wheel cap feeder

Model TruCap-X-Vert

• Heavy duty 304 stainless steel welded C frame for easy mounting over existing conveyors
• Heavy duty linear carriage system for height adjustability
• All shafts and threaded rods manufactured in 304 stainless steel
• Heavy duty casters standard
• No change of parts needed for a wide range of containers
• Front covers with safety interlock switches standard
• Top driven to insure no product spillage into drive assembly
• Adjustable height to accommodate containers from 1” to 14” inches tall (Optional power height adjustment)

Capping discs features:

• 4, 6, or 8 spindle configurations available, single gear box driven
• Independent spring loaded bottle capping discs for better torque and misalignment forgiveness
• Torque is able to be adjusted while the machine is running (When pneumatic clutch option is purchased)
• Clutches located away from capping discs to avoid corrosion
• Heavy duty gear driven mechanism, no belts used for power transmission
• Adjustable speed 3/4 Hp drive motor for capping discs
• Optional second drive motor to rotate the first set of capping discs on the opposite direction
• Capping head assembly manufactured in 316L stainless steel 95% of manufactured parts are in stainless steel, or FDA approved polymer materials
• Independent adjustment for front or back capping discs
• Capping disc position is adjustable while the machine is running, without opening the safety covers.
• Fully adjustable for cap sizes ranging from 8 mm to 130 mm in diameter

Bottle belts features:

• Bottle belt width adjusted via front knobs
• Bottle belt height adjusted via front knobs
• Heavy duty gear drive mechanism, no belts used for power transmission.
• Adjustable speed heavy duty 3/4 Hp, motor gearbox
• Bottle belt assemblies can be adjusted independently for width, taper, and angle to accommodate various sizes and styles of containers. Optional double belt assembly with independent height and angle adjustment
• Mechanical bottle cap sorting, requires no fine
• tuning
• Once setup, caps will only be dispensed in the correct orientation
• 24” diameter feeding disc
• Interchangeable sorting rings
• Easy changeover for caps from 15mm to 53mm in diameter, with appropriate tooling
• Sorter mounted on machine, no need for independent height adjustment
• Driven by 1/4 Hp DC gear motor
• Speed controlled via potentiometer
• 3 Cubic feet integrated cap hopper

Automatic Inline Bottle Capping Machine Model TruCap-X-Cent

ACASI Inline Bottle Capper with Centrifugal cap feeder

Model TruCap-X-Cent

• Heavy duty 304 stainless steel welded C frame for easy mounting over existing conveyors
• Heavy duty linear carriage system for height adjustability
• All shafts and threaded rods manufactured in 304 stainless steel
• Heavy duty casters standard
• No change of parts needed for a wide range of containers
• Front covers with safety interlock switches standard
• Top driven to insure no product spillage into drive assembly
• Adjustable height to accommodate containers from 1” to 14” tall (Optional power height adjustment)

Capping discs features:

• 4, 6, or 8 spindle machine configurations available, single gear box driven
• Independent spring loaded capping discs for better torque and misalignment forgiveness
• Torque is able to be adjusted while the machine is running (When pneumatic clutch option is purchased)
• Clutches located away from capping discs to avoid corrosion
• Heavy duty gear driven mechanism, no belts used for power transmission
• Adjustable speed 1/2 Hp drive motor for bottle capping discs
• Optional second drive motor to rotate the first set of capping discs on the opposite direction
• Bottle capping head assembly manufactured in 316L stainless steel 95% of manufactured parts are in stainless steel, or FDA approved polymer materials
• Independent adjustment for front or back capping discs
• Bottle capping disc position is adjustable while the machine is running, without opening the safety covers
• Fully adjustable for caps sizes ranging from 8 mm to 130 mm in diameter

Bottle belts features:

• Bottle belt width adjusted via front knobs
• Bottle belt height adjusted via front knobs
• Heavy duty gear drive mechanism, no belts used for power transmission
• Adjustable speed heavy duty 1/2 Hp, motor gearbox
• Bottle belt assemblies can be adjusted independently for width, taper, and angle to accommodate various sizes and styles of containers
• Optional double belt assembly with independent height and angle adjustment

Centrifugal type cap feeder features:

• Construction in stainless steel
• 32” diameter feeding disc ramp assembly.
• Cap rejecting by photoelectric sensor.
• Cap by demand controlled by photoelectric sensor
• Standard 4 pieces slotted cross for easy tooling adjustment
• Easy changeover for caps from 10mm to 90mm in diameter
• Easy changeover for caps from 0.125 to 2.5” in height
• Sorter mounted on machine, no need for independent height adjustment.
• Includes filter pressure regulator
• Flow controls on all air hoses
• Adjustable vibration system on cap hopper
• Force provided by 1/3 Hp DC gear motor
• Speed control by potentiometer
• Cap hopper features:
• 3 Cubic feet stainless steel deposit.
• Vibrator with independent control mounted on cap hopper
• Low friction limit switch for cap level sensing on centrifugal cap feeder

Automatic Inline Bottle Capping Machine Model TruCap-X-WFall

ACASI Inline Bottle Capper with Waterfall cap feeder

Model TruCap-X-WFall

• Heavy duty 304 stainless steel welded C frame for easy mounting over existing conveyors
• Heavy duty linear carriage system for height adjustability
• All shafts and threaded rods manufactured in 304 stainless steel
• Heavy duty casters standard
• No change of parts needed for a wide range of containers
• Front covers with safety interlock switches standard
• Top driven to insure no product spillage into drive assembly
• Adjustable height to accommodate containers from 1” to14” tall (Optional power height adjustment)

Capping discs features:

• 4, 6, or 8 spindle machine configurations available, single gear box driven
• Independent spring loaded bottle capping discs for better torque and misalignment forgiveness
• Torque is able to be adjusted while the machine is running (When pneumatic clutch option is purchased)
• Clutches located away from capping discs to avoid corrosion
• Heavy duty gear driven mechanism, no belts used for power transmission
• Adjustable speed 1/2 Hp drive motor for bottle capping discs
• Optional second drive motor to rotate the first set of capping discs on the opposite direction
• Capping head assembly manufactured in 316L stainless steel 95% of manufactured parts are in stainless steel, or FDA approved polymer materials
• Independent adjustment for front or back capping discs
• Capping disc position is adjustable while the machine is running, without opening the safety covers
• Fully adjustable for bottle cap sizes ranging from 8 mm to 130 mm in diameter

Bottle belts features:

• Bottle belt width adjusted via front knobs
• Bottle belt height adjusted via front knobs
• Heavy duty gear drive mechanism, no belts used for power transmission.
• Adjustable speed heavy duty 1/2 Hp, motor gearbox
• Bottle belt assemblies can be adjusted independently for width, taper, and angle to accommodate various sizes and styles of containers
• Optional double belt assembly with independent height and angle adjustment
• Waterfall feeder features:
• Construction in stainless steel
• 18” wide belt
• Cap feeder is adjustable for bottle caps from 8mm to 110mm in diameter, via quick adjust knobs
• Caps feed on demand, controlled by photoelectric sensor
• Air shutoff valve controlled by photoelectric sensor
• Includes filter regulator
• Feeder inclination adjustable from 0 to 5 degrees
• Complete height adjustment by structure 1” bolts and/or cap delivery system.
• 10 cubic foot cap hopper
• Dive provided by DC gear motor.
• Independent speed control (potentiometer)

Inline Bottle Cap Tightener – Model TruCap

ACASI Inline Bottle Cap Tightener Model TruCap

• Heavy duty 304 stainless steel welded C frame for easy mounting over existing conveyors
• Heavy duty linear carriage system for height adjustability
• All shafts and threaded rods manufactured in 304 stainless steel
• Heavy duty casters standard
• No change of parts needed for a wide range of containers
• Front covers with safety interlock switches standard
• Top driven to insure no product spillage into drive assembly
• Adjustable height to accommodate containers from 1” to 14” tall (Optional power height adjustment)
• Capping discs features:
• 4, 6, or 8 spindle configurations available, single gear box driven
• Independent spring loaded bottle capping discs for better torque and misalignment forgiveness
• Torque is able to be adjusted while the machine is running (When pneumatic clutch option is purchased)
• Clutches located away from capping discs to avoid corrosion
• Heavy duty gear driven mechanism, no belts used for power transmission Adjustable speed 1/2 Hp drive motor for capping discs
• Optional second drive motor to rotate the first set of capping discs on the opposite direction
• Capping head assembly manufactured in 316L stainless steel
• 95% of manufactured parts are in stainless steel, or FDA approved polymer materials.
• Independent adjustment for front or back capping discs
• Capping disc position is adjustable while the machine is running, without opening the safety covers.
• Fully adjustable for bottle cap sizes ranging from 8 mm to 130 mm in diameter
• Bottle belts features:
• Bottle belt width adjusted via front knobs
• Bottle belt height adjusted via front knobs
• Heavy duty gear drive mechanism, no belts used for power transmission. Adjustable speed heavy duty 1/2 Hp, motor gearbox
• Bottle belt assemblies can be adjusted independently for width, taper, and angle to accommodate various sizes and styles of containers.
• Optional double belt assembly with independent height and angle adjustment

Automatic Inline Bottle Capping Machine Model CAI-X-WFall

ACASI Inline Cap Tightener Model CAI-10X

• Heavy duty 304 stainless steel welded C frame for easy mounting over existing conveyors
• Heavy duty linear carriage system for height adjustability
• All shafts and threaded rods manufactured in 304 stainless steel
• Heavy duty casters standard
• No change of parts needed for a wide range of containers
• Front and back covers with safety interlock switches standard
• Top driven to insure no product spillage into drive assembly
• Adjustable height to accommodate containers from 1” to 14” tall (Optional power height adjustment)

Capping discs features:

• 4, 6 or 8 spindle configurations available, single gear box driven
• Independent spring loaded capping discs for better torque and misalignment forgiveness
• Torque is able to be adjusted while the machine is running
• Clutches located away from capping discs to avoid corrosion
• Heavy duty gear driven mechanism; no belts used for power transmission
• Mechanical clutch assemblies standard (Optional pneumatic clutch upgrade available)
• Adjustable speed 1 Hp/3 phase drive motor for capping discs
• Optional second drive motor to rotate the first set of capping discs on the opposite direction
• Most bearings protected by seals
• Capping head assembly manufactured in 316L stainless steal
• All parts manufactured in stainless steel or FDA approved polymer materials
• Independent adjustment for front or back capping discs
• Capping disc position is adjustable while the machine is running, without opening the safety covers
• Fully adjustable for cap sizes ranging from 8 mm to 130 mm in diameter

Bottle belt features:

• Bottle belt width adjusted via front knobs
• Bottle belt height adjusted via front knobs
• Heavy duty gear drive mechanism; no belts used for power transmission
• Adjustable speed heavy duty 1 Hp/3 phase motor gearbox
• Bottle belt assemblies can be adjusted independently for width, taper, and angle to accommodate various sizes and styles of containers
• Optional double belt assembly with independent height and angle adjustment
• Electric and pnuematic requirements:
• 208 – 240 Volts/ single phase/ 50/60Hz/ 15 Amps
• 5 CFM @ 80 p.s.i.
• ACASI Cap Feeder Model CF-4400

Features:

• Construction in stainless steel
• 18” wide belt
• Cap feeder is adjustable for caps from 8mm to 110mm in diameter via quick adjust knobs
• Caps feed on demand; controlled by photoelectric sensor
• Air shutoff valve controlled by photoelectric sensor
• Includes filter regulator
• Feeder inclination adjustable from 0 to 5 degrees
• Complete height adjustment by structure 1” bolts and/or cap delivery system
• 10 cubic feet cap hopper
• Drive provided by DC gear motor
• Independent speed control (potentiometer)

Inline Cap Tighteners

ACASI Inline capping machine model CAI-10X

• Heavy duty 304 Stainless steel welded C frame for easy mounting in existing conveyors.
• Heavy duty linear carriage system for height adjustability.
• All shafts and threaded rods manufactured in 304 stainless steel.
• Heavy duty casters standard.
• No change of parts needed for a wide range of containers.
• Front and back covers with safety interlock standard.
• Top driven to insure no product spillage into drive assembly.
• Fully adjustable from 1 inch to 14 inch high containers. (Optional electrical height adjustment).

Capping discs features:

• Available configuration of 4, 6 and 8 capping discs.
• Independent spring loaded capping discs for better torque and mis-alignment forgiveness.
• Adjustability of torque while the machine is running.
• Clutches located away from capping discs to avoid corrosion.
• Heavy duty gear driven mechanism, no belts used for power transmission.
• Mechanical or pneumatic clutches available.
• Adjustable speed ½ Hp 3 phase for 4 and 6 capping discs, 1 Hp 3 phase 8 capping discs.
• Optional separate motor for first capping disc set opposite rotation direction.
• Most bearings protected by seals.
• Capping assembly manufactured in 316L stainless steel.
• All parts manufactured in stainless steel or strong FDA approved plastic materials.
• Independent front or back capping discs adjustability.
• Adjustability of capping discs position while the machine is running without opening the safety covers.
• Fully adjustable for caps from 8 mm to 130 mm.

Bottle belts features:

• Bottle belts width adjusted through front knobs.
• Bottle belts height adjusted via front knobs.
• Heavy duty gear driven mechanism, no belts used for power transmission.
• Adjustable speed heavy duty 1 Hp, 3 phase motor gearbox.
• Each belt has additional independent width adjustability to be able to hold the container in different widths.
• Double belt with independent height adjustability (Optional).
• Independent spring loaded capping discs for better torque and mis-alignment forgiveness.
• Bottle belts angle adjustability for tapered bottles.
• Electric and pneumatic requirements:
• 208 – 240 Volts, Single phase, 50/60Hz, 15 Amps.
• 5 CFM @ 80 p.s.i. (Only with pneumatic clutches)

Hand-Held Bottle Capper – Model CS 1000

ACASI Machinery manufactures capping machines and bottle capper equipment in both automatic and handheld models

• Top weight balancer
• Capping by coned shaped polyurethane insert
• Torque adjustment by mechanical clutch
• Air operated (5 CFM @ 80 p.s.i)
• Up to 80 containers per minute
• Quick release for capping insert holder (For fast changeovers)

Automatic Inline Bottle Capping Machine Model CAI-X-Cent

ACASI Inline capper Model CAIX-5200

• Heavy duty 304 stainless steel welded C frame for easy mounting over existing conveyors
• Heavy duty linear carriage system for height adjustability
• All shafts and threaded rods manufactured in 304 stainless steel
• Heavy duty casters standard
• No change of parts needed for a wide range of containers
• Front and back covers with safety interlock switches standard
• Top driven to insure no product spillage into drive assembly
• Adjustable height to accommodate containers from 1” to 14” tall (Optional power height adjustment)

Capping discs features:

• 4, 6, or 8 spindle configurations available, single gear box driven
• Independent spring loaded capping discs for better torque and misalignment forgiveness.
• Torque is able to be adjusted while the machine is running
• Clutches located away from capping discs to avoid corrosion
• Heavy duty gear driven mechanism, no belts used for power transmission
• Mechanical clutch assemblies standard (Optional pneumatic clutch upgrade available)
• Adjustable speed 1 Hp/3 phase drive motor for capping discs
• Optional second drive motor to rotate the first set of capping discs on the opposite direction
• Most bearings protected by seals
• Capping head assembly manufactured in 316L stainless steel
• All parts manufactured in stainless steel, or FDA approved polymer materials
• Independent adjustment for front or back capping discs
• Capping disc position is adjustable while the machine is running, without opening the safety covers
• Fully adjustable for caps sizes ranging from 8 mm to 130 mm in diameter

Bottle belts features:

• Bottle belt width adjusted via front knobs
• Bottle belt height adjusted via front knobs
• Heavy duty gear drive mechanism, no belts used for power transmission.
• Adjustable speed heavy duty 1 Hp, 3 phase motor gearbox
• Bottle belt assemblies can be adjusted independently for width, taper, and angle to accommodate various sizes and styles of containers.
• Optional double belt assembly with independent height and angle adjustment
• Electric and pneumatic requirements:
• 208 – 240 Volts/single phase/ 50/60Hz/15 Amps.
• 5 CFM @ 80 p.s.i.

Centrifugal type cap feeder features:

• Construction in stainless steel
• 32” diameter feeding disc – ramp assembly
• Cap rejecting by photoelectric sensor
• Cap by demand controlled by photoelectric sensor
• Standard 4 pieces slotted cross for easy tooling adjustment.
• Easy changeover for caps from 10mm to 90mm in diameter
• Easy changeover for caps from 0.125 to 2.5” in height.
• Sorter mounted on machine, no need for independent height adjustment
• Includes filter regulator
• Flow controls on all air hoses.
• Adjustable vibration system on cap hopper.
• Force provided by 1/3 Hp DC gear motor
• Speed control by potentiometer

Cap hopper features:

• 3 Cubic feet stainless steel hopper
• Vibrator with independent control mounted on cap hopper.
• Low friction limit switch for cap level sensing on centrifugal cap feeder

Options:

• Upgrade of each set of clutches
• Double belt assembly, independent belt, height adjustable
• Power height adjustment upgrade
• Additional drive motor to reverse the first set of spindles
• Class 1 Division 1 Explosion Proofing
• Spacing wheel assembly to control bottle feed into machine
• Bottle reject system, with laser sensor for uncapped containers or cross threaded caps. Includes dump table.
• Pressure cap wheel
• Nylon U Channel for spray an

Chuck CappersChuck bottle capper model PC1-JAW-VIB

ACASI single head chuck bottle capper with vibratory type cap feeder model PC1-VIB

• Designed to place plastic or metal caps on a wide range of containers – enclosures
• Includes one set of change of parts (star wheel, outer guide, cap delivery and chuck)
• Acasi magnetic clutch capping head model MJ90 (Magnetic with Jaws), visual torque setting for ease of adjustment, manufactured in 304 stainless steel
• Pick and place mechanism in stainless steel. Cap is delivered to the chuck, then the chuck comes down holding the cap (This prevents cross-threading)
• Fully adjustable from 7” to 14” high containers. (Special configurations available on request)
• Maximum bottle diameter with 12 pocket star wheel: 4.25”
• Maximum bottle diameter with 6 pocket star wheel: 8.00”
• Automatic start and stop with presence or absence of containers
• 12 or 6 pocket center star wheel for container handling (Depends on the size of the container)
• Jamming clutches with electric signal for shutdown on product jamming (This prevents major damage to parts and minimizes possible spills)
• 2 Hp AC motor with frequency drive speed control
• Stainless steel electric enclosure.
• Heavy duty 304 Stainless steel welded frame
• Stainless steel enclosure with polycarbonate windows and safety switches
• All shafts from ¼ to 2.5” are manufactured in 304 stainless steel
• Gear driven transmission machine to avoid timing loss
• Complete height adjustment with bottle setting guide for quick changeovers
• Tool-less changeovers for star wheels and most change parts

Cap chute features:

• All contact parts in stainless steel
• Designed and tested for each cap to avoid jamming
• Includes cap demand sensor to start and stop the cap feeder
• Quick change over, since parts are pin guided so no tweaking is required

Vibratory cap feeder features:

• Aluminum casting with polyurethane liner to minimizes cap marking-scratching
• 24” diameter feeding disc – ramp assembly.
• Bad caps rejected mechanically, minimum air usage.
• Cap by demand controlled by photoelectric sensor.
• Bowl tooled for one model cap
• Adjustable vibration and speed control
• Heavy duty extra heavy base for better vibration central
• Sorter mounted on machine, no need for independent height adjustment
• Includes filter regulator.
• Flow controls on all air hoses.

ROP1-VIB Capping Machine

ACASI single head ROPP bottle capper with vibratory feeder model ROP1-VIB

• Designed to place and form metal caps on a wide range of containers – enclosures.
• Price includes one set of change of parts (star wheel, outer guide and cap delivery)
• ACASI ROPP capping head model VA90, manufactured in 304 stainless steel and hardened forming discs
• Bottle will pick up cap and the container will be indexed into position
• Fully adjustable from 7” to 14” high containers (special configurations available on request)
• Maximum bottle diameter with 12 pocket star wheel: 4.25”
• Maximum bottle diameter with 6 pocket star wheel: 8.00”
• Center CAM manufactured in special cam rated plastic material
• Automatic start and stop with presence or absence of containers
• 12 or 6 pocket center star wheel for container handling (Depends on the size of the container)
• Jamming clutches with electric signal for shutdown on product jamming (This prevents major damage to parts and minimizes possible spills)
• 2 Hp AC motor with frequency drive speed control
• Stainless steel electric enclosure
• Heavy duty 304 stainless steel welded frame
• Stainless steel enclosure with polycarbonate windows and safety switches
• All shafts from ¼ to 2.5” are manufactured in 304 stainless steel
• Gear driven transmission machine to avoid timing loss
• Complete height adjustment with bottle setting guide for quick changeovers
• Tool less changeovers for star wheels and most change parts

Cap chute features:

• All contact parts in stainless steel
• Designed and tested for each cap to avoid jamming.
• Includes cap demand sensor to start and stop the cap feeder
• Quick change over, since parts are pin guided so no tweaking is required

Vibratory cap feeder features:

• Aluminum casting with polyurethane liner to minimizes cap marking-scratching
• 24” diameter feeding disc – ramp assembly
• Bad caps rejected mechanically, minimum air usage
• Cap by demand controlled by photoelectric sensor
• Bowl tooled for one model cap
• Adjustable vibration and speed control
• Heavy duty extra heavy base for better vibration central
• Sorter mounted on machine, no need for independent height adjustment
• Includes filter regulator
• Flow controls on all air hoses

Chuck bottle capper model PC1

ACASI single head chuck bottle capper with waterfall type cap feeder

Model PC1-4400

• Designed to place plastic or metal caps on a wide range of containers – enclosures
• Price includes one set of change parts (star wheel, outer guide, cap delivery and chuck)
• ACASI magnetic clutch capping head model MJ90 (Magnetic with Jaws), visual torque setting for ease of adjustment, manufactured in 304 stainless steel
• Pick and place mechanism in stainless steel. Cap is delivered to the chuck, and then the chuck comes down holding the cap (This prevents cross- threading)
• Fully adjustable from 7” to 14” high containers. (Special configurations available on request)
• Maximum bottle diameter with 12 pocket star wheel: 4.25”
• Maximum bottle diameter with 6 pocket star wheel: 8.00”
• Center CAM manufactured in special cam rated plastic material
• Automatic start and stop with presence or absence of containers
• 12 or 6 pocket center star wheel for container handling (Depends on the size of the container)
• Jamming clutches with electric signal for shutdown on product jamming (This prevents major damage to parts and minimizes possible spills)
• 2 Hp AC motor with frequency drive speed control
• Stainless steel electric enclosure
• Heavy duty 304 stainless steel welded frame
• Stainless steel enclosure with polycarbonate windows and safety switches
• All shafts from ¼ to 2.5” manufactured in 304 stainless steel
• Gear driven transmission machine to avoid timing loss
• Complete height adjustment with bottle setting guide for quick changeovers
• Tool-less changeovers for star wheels and most change parts

Cap chute features:

• All contact parts in stainless steel
• Designed and tested for each cap to avoid jamming
• Includes cap demand sensor to start and stop the cap feeder
• Quick change over, since parts are pin guided so no tweaking is required.
• Cap feeder and orienting features:
• Construction in stainless steel
• 18” wide belt
• Belt spacing designed for your application, can accommodate caps from 8 mm to 110 mm in diameter
• Cap by demand controlled by photoelectric sensor
• Air shutoff valve controlled by photoelectric sensor
• Includes filter regulator
• Knob adjustments of cap delivery system from 8mm to 110mm
• Inclination range from 0 to 5 degrees
• Complete height adjustment by structure 1 inch bolts and/or cap delivery system
• 10 cubic foot cap hopper
• System drive provided by DC gear motor
• Speed control by potentiometer

• Designed to place plastic or metal caps on a wide range of containers – enclosures
• Includes one set of change of parts (star wheel, outer guide, cap delivery and chuck)
• Acasi magnetic clutch capping head model MJ90 (Magnetic with Jaws), visual torque setting for ease of adjustment, manufactured in 304 stainless steel
• Pick and place mechanism in stainless steel. Cap is delivered to the chuck, then the chuck comes down holding the cap (This prevents cross-threading)
• Fully adjustable from 7” to 14” high containers. (Special configurations available on request)
• Maximum bottle diameter with 12 pocket star wheel: 4.25”
• Maximum bottle diameter with 6 pocket star wheel: 8.00”
• Automatic start and stop with presence or absence of containers
• 12 or 6 pocket center star wheel for container handling (Depends on the size of the container)
• Jamming clutches with electric signal for shutdown on product jamming (This prevents major damage to parts and minimizes possible spills)
• 2 Hp AC motor with frequency drive speed control
• Stainless steel electric enclosure.
• Heavy duty 304 Stainless steel welded frame
• Stainless steel enclosure with polycarbonate windows and safety switches
• All shafts from ¼ to 2.5” are manufactured in 304 stainless steel
• Gear driven transmission machine to avoid timing loss
• Complete height adjustment with bottle setting guide for quick changeovers
• Tool-less changeovers for star wheels and most change parts

Cap chute features:

• All contact parts in stainless steel
• Designed and tested for each cap to avoid jamming
• Includes cap demand sensor to start and stop the cap feeder
• Quick change over, since parts are pin guided so no tweaking is required

Vibratory cap feeder features:

• Aluminum casting with polyurethane liner to minimizes cap marking-scratching
• 24” diameter feeding disc – ramp assembly.
• Bad caps rejected mechanically, minimum air usage.
• Cap by demand controlled by photoelectric sensor.
• Bowl tooled for one model cap
• Adjustable vibration and speed control
• Heavy duty extra heavy base for better vibration central
• Sorter mounted on machine, no need for independent height adjustment
• Includes filter regulator.
• Flow controls on all air hoses.

• Designed to place and form metal caps on a wide range of containers – enclosures.
• Price includes one set of change of parts (star wheel, outer guide and cap delivery)
• ACASI ROPP capping head model VA90, manufactured in 304 stainless steel and hardened forming discs
• Bottle will pick up cap and the container will be indexed into position
• Fully adjustable from 7” to 14” high containers (special configurations available on request)
• Maximum bottle diameter with 12 pocket star wheel: 4.25”
• Maximum bottle diameter with 6 pocket star wheel: 8.00”
• Center CAM manufactured in special cam rated plastic material
• Automatic start and stop with presence or absence of containers
• 12 or 6 pocket center star wheel for container handling (Depends on the size of the container)
• Jamming clutches with electric signal for shutdown on product jamming (This prevents major damage to parts and minimizes possible spills)
• 2 Hp AC motor with frequency drive speed control
• Stainless steel electric enclosure
• Heavy duty 304 stainless steel welded frame
• Stainless steel enclosure with polycarbonate windows and safety switches
• All shafts from ¼ to 2.5” are manufactured in 304 stainless steel
• Gear driven transmission machine to avoid timing loss
• Complete height adjustment with bottle setting guide for quick changeovers
• Tool less changeovers for star wheels and most change parts

Cap chute features:

• All contact parts in stainless steel
• Designed and tested for each cap to avoid jamming.
• Includes cap demand sensor to start and stop the cap feeder
• Quick change over, since parts are pin guided so no tweaking is required

Vibratory cap feeder features:

• Aluminum casting with polyurethane liner to minimizes cap marking-scratching
• 24” diameter feeding disc – ramp assembly
• Bad caps rejected mechanically, minimum air usage
• Cap by demand controlled by photoelectric sensor
• Bowl tooled for one model cap
• Adjustable vibration and speed control
• Heavy duty extra heavy base for better vibration central
• Sorter mounted on machine, no need for independent height adjustment
• Includes filter regulator
• Flow controls on all air hoses

• Designed to place plastic or metal caps on a wide range of containers – enclosures
• Price includes one set of change parts (star wheel, outer guide, cap delivery and chuck)
• ACASI magnetic clutch capping head model MJ90 (Magnetic with Jaws), visual torque setting for ease of adjustment, manufactured in 304 stainless steel
• Pick and place mechanism in stainless steel. Cap is delivered to the chuck, and then the chuck comes down holding the cap (This prevents cross- threading)
• Fully adjustable from 7” to 14” high containers. (Special configurations available on request)
• Maximum bottle diameter with 12 pocket star wheel: 4.25”
• Maximum bottle diameter with 6 pocket star wheel: 8.00”
• Center CAM manufactured in special cam rated plastic material
• Automatic start and stop with presence or absence of containers
• 12 or 6 pocket center star wheel for container handling (Depends on the size of the container)
• Jamming clutches with electric signal for shutdown on product jamming (This prevents major damage to parts and minimizes possible spills)
• 2 Hp AC motor with frequency drive speed control
• Stainless steel electric enclosure
• Heavy duty 304 stainless steel welded frame
• Stainless steel enclosure with polycarbonate windows and safety switches
• All shafts from ¼ to 2.5” manufactured in 304 stainless steel
• Gear driven transmission machine to avoid timing loss
• Complete height adjustment with bottle setting guide for quick changeovers
• Tool-less changeovers for star wheels and most change parts

Cap chute features:

• All contact parts in stainless steel
• Designed and tested for each cap to avoid jamming
• Includes cap demand sensor to start and stop the cap feeder
• Quick change over, since parts are pin guided so no tweaking is required.
• Cap feeder and orienting features:
• Construction in stainless steel
• 18” wide belt
• Belt spacing designed for your application, can accommodate caps from 8 mm to 110 mm in diameter
• Cap by demand controlled by photoelectric sensor
• Air shutoff valve controlled by photoelectric sensor
• Includes filter regulator
• Knob adjustments of cap delivery system from 8mm to 110mm
• Inclination range from 0 to 5 degrees
• Complete height adjustment by structure 1 inch bolts and/or cap delivery system
• 10 cubic foot cap hopper
• System drive provided by DC gear motor
• Speed control by potentiometer